Обсуждение:Атмосферный техник
ПРИОРИТЕТ: Отсутствует
 Atmospheric Technician |
Глава: Chief Engineer
|
The Atmospheric Technician
As an atmospheric technician you are one of two things: The person that saves the station from a certain doom when the SM delaminates or the Station Engineer who likes to play around with gasses in his own little corner. Whichever one you are or choose to be doesn't matter, all that does is that you know how to do your job best and more effective than others. Try and be nice to people who are new to atmospherics or engineering in general and maybe Show them the ropes a little if you can.
Basic skills: Fixing the atmos of a room after it has been breached, Basic distro optimization and helping the rest of Engineering when damage occurs.
Advanced skills: Building effective gas farms for all the fancy and expensive gasses, Running the HFR, Knowing how to do toxins and not accidentally plasma flooding because of smart-pipes
Atmospheric equipment and machines
To stay prepared, and on top of your game there is a plethora of items and other doodads you can bring along. You can find a number of those items shown here in a list to give you some inspiration on what to bring along or to simply show you what you have in your arsenal. For a full list of all atmospheric items see: Atmospherics items
Aside from Items and equipment there's also a number of different machines you have access to and can make good use of as an atmospheric technician.These can be found here in their respective tab with a small explanation of their use listed for them.
| Item | Description | Item | Description |
|---|---|---|---|
 Rapid Piping Device (RPD) |
A Rapid Piping Device, this may seem as a no-brainer to bring with you but it will still be featured on here. This will be your number one most used tool (aside from maybe your wrench) during all of your shifts as an atmos tech. An RPD is a simple device that is able to place an infinite number of pipes in twelve different colors. It can plasma atmospherics pipes, disposal pipes and transit tubes. The section below here will give a better and more elaborate explanation of how an RPD works. See: The RPD |
 Rapid Construction Device (RCD) |
Your best friend when it comes to repairs or quickly building stuff when you do not feel like using your hands in manual labor. This device and its more advanced counterparts can be used to construct everything from walls to windows and even simple furniture when outfitted with the right upgrades. |
 Material pouch |
The material pouch is a small pouch capable of holding two stacks of a material of your choosing. Handy to keep in your pocket and much less space consuming in your bag then hauling around loose sheets of materials! |  Construction bag |
The construction bag is a handy bag that can hold a lot of construction materials, things such as electronics, cables and various boards. Great to keep in your pocket and loaded with materials for when things inevitably go south. |
 Welding helmet/Goggles |
Just a simple welding helmet or goggles bring this to avoid going blind when you need to weld things. Welding goggles or a welding gas mask also make for a good substitute. Alternatively the welding protection from your modsuit will also works to protect your eyes. |  Analyzer |
An analyzer, can be used to scan the atmosphere around you, and shows you what's inside a Canister or a pipe. The analyzer can also be added to an unscrewed Security Camera to upgrade it to an X-ray camera, and will prove invaluable in the case of a anomaly. Pressing Z with this in your hand will tell you the gas contents of the tile you are standing in. |
 ATMOS holofan projector |
The ATMOS holofan projector is your best friend when it comes to quickly sealing off an area or otherwise creating an atmos proof barrier. With the press of  Ordinary left-click. It doesn't matter if Боевой режим  По умолчанию включается на клавишу 4 или F. Если режим включён, нажав пустой рукой по персоне, вы ударите  его, или поможете  ему, если режим выключен. Не позволяет вам менятся местами или быть подвинутым другим игроком. is on or not. the projector will create a holographic fire-lock through which no gas can pass. It can project a maximum of six barriers at a time, and left clicking on a barrier will cause it to disappear again.
|
 Multitool |
Multitools can be used to do a number of things, everything from Hacking doors and machines to checking how much power is running through a wire. Its main application in atmospherics however is a little different. You can use a multitool to change the layer that devices like freezers attach to. |
 Advanced fire extinguisher |
Advanced fire extinguishers fight fire by spraying a large volume of fire fighting foam when used. It comes loaded with a standard 50 units of the foam and is highly effective in putting out engine and other fires. Be mindful when using these since the foam will leave puddles of stabilized plasma. Effective fire fighting but a pain in the ass to clean up after! |  Fire axe |
The fire axe is generally used for quickly demolishing windows or opening doors into sealed areas. It can also be used as a weapon to fend off any unwanted guests in atmos that may try to steal the gasses you made. |
 Atmospherics MODsuit |
The atmospherics MODsuit offers protection against both the extreme cold of space and the heat of fire, its protective plating covering the user whole when fully deployed. Its standard loaded modules are the MOD T-ray scanner, and the MOD Flashlight module. This is essentially a Fire-proof spacesuit that just like any other MODsuit functions as a backpack. |  Atmos firesuit and helmet |
The atmos firesuit and fire fighting helmet are two pieces of fire resistant equipment that you can use in fire-fighting. You will still take damage from extreme heat or a lack of pressure but at a lessened rate compared to a normal fire-suit. For that reason this also makes for a decent option as a budget spacesuit! |
 Backpack firefighter tank |
The backpack firefighter tank is a back mounted piece of firefighting equipment. It has 200 Units of capacity and can Only be reloaded with water. Aside from being the ultimate version of a fire extinguisher the backpack firefighter tank brings alot more to the table than just water in high volumes. It has three different operating modes that will be detailed in the list below:
| ||
| Item | Description |
|---|---|
 Canister |
Canisters are great for storing large volumes of gas in a way that is not very space intensive. All canisters are can safely hold pressures up to 500 MPa and temperatures up to 10.000 K. If either of these are exceeded the canister will rupture and either explode or start to leak gas all over the room. These limits can be exceeded however by turning the canisters shielding on. Doing so will allow it to hold an infinite pressure and temperature without rupturing. The shield on a canister is powered by either: The power cell within the canister or the APC of the room the can is in, if both of these lose power the shields will turn off. If a canister is damaged gas will leak from the small cracks within it, so be sure to check if a canister you're using isn't damaged! |
 Portable air scrubber |
Portable air scrubbers function just like their static counterparts. They're just a simple scrubber that you can bring along to fix any gas leaks and filter contaminants from the air. These can be wrenched to a connector too! It has space for a small holding tank that can be filled with whatever has been scrubbed from the air. Very useful for cleaning up after a fire happened or if you had a small accident in atmospherics. These will also filter smoke out of the air! |
 Portable air pump |
Portable air pumps are small handy little devices that allow you to quickly pump air in and out of an area. They have two different operating modes: Pumping gas into themselves and taking it from the air, or pumping gas out into the area they're in. A small holding tank can also be attached to be used and filled to a higher capacity than a normal canister can do it, going up to 2533 kPa instead of the normal 1013 kPa a canister will pressurize to. |
 Pipe dispensers |
Pipe dispensers can usually be found standing around in atmospherics. These machines come in two flavors, one for atmospheric pipes and the other for disposal pipes. They are essentially a static version of an RPD and thus not very useful since you cant quickly or easily work with them to build large pipe-nets. |
 Space heater |
Space heaters are small portable heaters that you can place in a room to bring it up or back down to normal room temperature (20°C). They work on an internal battery charge and when that power cell runs out the heater will stop functioning. A space heater's name can be a little deceptive since it can do both cooling and heating, making it one of your most valuable assets in repairing breaches and restoring the air. Upgrading the parts and cell within these will make them work more effective by cooling and heating faster. |
 Freezer/Heater (Thermomachine) |
Thermomachines are among your most useful and valuable assets. They can operate in two different modes: cooling and heating. Upgrading the parts within these will allow them to cool down to a much lower temperature or heat to a much higher temperature, the volume of gas they can cool at once is also affected by their internal parts. Thermomachines are great for rapidly changing the temperature of a large volume of gas without the need to create a cooling loop or burn chamber. You can change the layer they attach to by screwing open the panel and Ordinary left-click. It doesn't matter if Боевой режим По умолчанию включается на клавишу 4 или F. Если режим включён, нажав пустой рукой по персоне, вы ударите его, или поможете ему, если режим выключен. Не позволяет вам менятся местами или быть подвинутым другим игроком. is on or not. them with a multitool.
|
 Air alarm |
Air alarms can be found in every room on the station. They display the contents of the air, the temperature, pressure the room is at and, function as a control panel for all the scrubbers and vents in that area. Air alarms can be used to tweak the settings of vents and scrubbers directly, by changing what is scrubbed out or how much air is pumped in, in the respective menu's for each type of device. The different operating modes as well as the alarm thresholds can be configured on air alarms. |
 Bluespace gas sender |
The Bluespace gas sender is a device that essentially functions as cloud storage for gas. Any gas put into the gas sender will instantly be put into its bluespace network that's linked to the Bluespace Gas Vendors around the station. All gasses that enter the gas sender are instantly cooled to 20°C and take up no space within the machine itself. These properties make it very useful for quickly getting rid of large volumes of very hot gas. |
 Crystallizer |
The Crystallizer is a machine that allows gases to be solidified and made into various materials. The exact use and operation the Crystallizer is explained in the Guide to Atmospherics |
 Space electrolyzer |
A space electrolyzer is a device used to create certain gasses through the process of electrolysis. Simply place one of these in a tile with the gas you want it to react with and turn it on. If the electrolyzer is wrenched to the floor it will be powered by the APC of the room. Otherwise it has space for an internal battery to run if the APC is down or out of power. |
 Hypertorus Fusion Reactor |
The Hypertorus Fusion Reactor also known as the danger donut, is a large circular device that takes up 3x3 tiles worth of space. It has a decently complex operation to it and is not recommended for beginner atmos techs to try their hand at. See the Guide to the Hypertorus Fusion Reactor for more information. |
Your duties
Now you may ask yourself: "What do I do all shift as an atmos tech?" Well im glad you asked!
As an atmospheric technicians you all too often enjoy little to no oversight over your projects. At the start of the shift you can busy yourself with lending a helping hand in setting up the Supermatter and solars. Optimizing distro is another thing you can do to save yourself from a headache later in the shift when damages inevitably occur. Running the turbine, mixing and making some of the rarer gasses or building your very own atmos SM are also fun projects you can undertake! But do remember, you are by all accounts part of the engineering department and expected to respond to damage across the station when they occur. Be a good Samaritan and help your colleagues, no one likes a grumpy tech in their department.
Fixing the air
Eventually someone, somewhere will do something that will cause the air on the station to either rapidly cool, or rapidly heat. Think of things like people leaving airlocks into space open, breaches not being fixed or toxins burning down and heating the station. Whatever it was that caused the air to no longer be breathable doesn't matter. Its your job as an atmos tech to fix it and fix it you're gonna.
Damages will be fairly easy to locate for you since 99% of the time there will be a fire alarm blaring in the affected area. The first thing you should do when you get there is scan the air with your analyzer to determine whats wrong and what needs to be done. Secondly you should locate the air alarm in the affected area and configure it accordingly for the damage in the area. If the air is contaminated with plasma or something else nasty, switch the operating mode to: Contaminated, to rapidly scrub all the nasty gasses away. You should never use Refill mode on the air alarms, you will over pressurize the room and cause more harm than good. If a room is freezing cold or boiling hot deploy some space heaters into the area and let them work your magic while you divert your attention to more pressing matters. Lastly check if the pipes connecting to the vents and scrubbers are still intact and if they're not repair them. Using pre installed machines and devices can save you alot of time when repairing area's so make good use of whats around you!